Goto Chapter: Top 1 2 3 4 5 6 7 A Bib Ind
 [Top of Book]  [Contents]   [Previous Chapter]   [Next Chapter] 

A Examples
 A.1 The Relators Option
 A.2 The Identities Option and PqEvaluateIdentities Function
 A.3 A Large Example
 A.4 Developing descendants trees

A Examples

There are a large number of examples provided with the ANUPQ package. These may be executed or displayed via the function PqExample (see PqExample (3.4-4)). Each example resides in a file of the same name in the directory examples. Most of the examples are translations to GAP of examples provided for the pq standalone by Eamonn O'Brien; the standalone examples are found in directories standalone/examples (p-quotient and p-group generation examples) and standalone/isom (standard presentation examples). The first line of each example indicates its origin. All the examples seen in earlier chapters of this manual are also available as examples, in a slightly modified form (the example which one can run in order to see something very close to the text example "live" is always indicated near -- usually immediately after -- the text example). The format of the (PqExample) examples is such that they can be read by the standard Read function of GAP, but certain features and comments are interpreted by the function PqExample to do somewhat more than Read does. In particular, any function without a -i, -ni or .g suffix has both a non-interactive and interactive form; in these cases, the default form is the non-interactive form, and giving PqStart as second argument generates the interactive form.

Running PqExample without an argument or with a non-existent example Infos the available examples and some hints on usage:

gap> PqExample();
#I                   PqExample Index (Table of Contents)
#I                   -----------------------------------
#I  This table of possible examples is displayed when calling `PqExample'
#I  with no arguments, or with the argument: "index" (meant in the  sense
#I  of ``list''), or with a non-existent example name.
#I  
#I  Examples that have a name ending in `-ni' are  non-interactive  only.
#I  Examples that have a  name  ending  in  `-i'  are  interactive  only.
#I  Examples with names ending in `.g' also have  only  one  form.  Other
#I  examples have both a non-interactive and an  interactive  form;  call
#I  `PqExample' with 2nd argument `PqStart' to get the  interactive  form
#I  of the example. The substring `PG' in an  example  name  indicates  a
#I  p-Group Generation example, `SP' indicates  a  Standard  Presentation
#I  example, `Rel' indicates it uses  the  `Relators'  option,  and  `Id'
#I  indicates it uses the `Identities' option.
#I  
#I  The following ANUPQ examples are available:
#I  
#I   p-Quotient examples:
#I    general:
#I     "Pq"                   "Pq-ni"                "PqEpimorphism"        
#I     "PqPCover"             "PqSupplementInnerAutomorphisms"
#I    2-groups:
#I     "2gp-Rel"              "2gp-Rel-i"            "2gp-a-Rel-i"
#I     "B2-4"                 "B2-4-Id"              "B2-8-i"
#I     "B4-4-i"               "B4-4-a-i"             "B5-4.g"
#I    3-groups:
#I     "3gp-Rel-i"            "3gp-a-Rel"            "3gp-a-Rel-i"
#I     "3gp-a-x-Rel-i"        "3gp-maxoccur-Rel-i"
#I    5-groups:
#I     "5gp-Rel-i"            "5gp-a-Rel-i"          "5gp-b-Rel-i"
#I     "5gp-c-Rel-i"          "5gp-metabelian-Rel-i" "5gp-maxoccur-Rel-i"
#I     "F2-5-i"               "B2-5-i"               "R2-5-i"
#I     "R2-5-x-i"             "B5-5-Engel3-Id"
#I    7-groups:
#I     "7gp-Rel-i"
#I    11-groups:
#I     "11gp-i"               "11gp-Rel-i"           "11gp-a-Rel-i"
#I     "11gp-3-Engel-Id"      "11gp-3-Engel-Id-i"
#I  
#I   p-Group Generation examples:
#I    general:
#I     "PqDescendants-1"      "PqDescendants-2"      "PqDescendants-3"
#I     "PqDescendants-1-i"
#I    2-groups:
#I     "2gp-PG-i"             "2gp-PG-2-i"           "2gp-PG-3-i"
#I     "2gp-PG-4-i"           "2gp-PG-e4-i"
#I     "PqDescendantsTreeCoclassOne-16-i"
#I    3-groups:
#I     "3gp-PG-i"             "3gp-PG-4-i"           "3gp-PG-x-i"
#I     "3gp-PG-x-1-i"         "PqDescendants-treetraverse-i"
#I     "PqDescendantsTreeCoclassOne-9-i"
#I    5-groups:
#I     "5gp-PG-i"             "Nott-PG-Rel-i"        "Nott-APG-Rel-i"
#I     "PqDescendantsTreeCoclassOne-25-i"
#I    7,11-groups:
#I     "7gp-PG-i"             "11gp-PG-i"
#I  
#I   Standard Presentation examples:
#I    general:
#I     "StandardPresentation" "StandardPresentation-i"
#I     "EpimorphismStandardPresentation"
#I     "EpimorphismStandardPresentation-i"           "IsIsomorphicPGroup-ni"
#I    2-groups:
#I     "2gp-SP-Rel-i"         "2gp-SP-1-Rel-i"       "2gp-SP-2-Rel-i"
#I     "2gp-SP-3-Rel-i"       "2gp-SP-4-Rel-i"       "2gp-SP-d-Rel-i"
#I     "gp-256-SP-Rel-i"      "B2-4-SP-i"            "G2-SP-Rel-i"
#I    3-groups:
#I     "3gp-SP-Rel-i"         "3gp-SP-1-Rel-i"       "3gp-SP-2-Rel-i"
#I     "3gp-SP-3-Rel-i"       "3gp-SP-4-Rel-i"       "G3-SP-Rel-i"
#I    5-groups:
#I     "5gp-SP-Rel-i"         "5gp-SP-a-Rel-i"       "5gp-SP-b-Rel-i"
#I     "5gp-SP-big-Rel-i"     "5gp-SP-d-Rel-i"       "G5-SP-Rel-i"
#I     "G5-SP-a-Rel-i"        "Nott-SP-Rel-i"
#I    7-groups:
#I     "7gp-SP-Rel-i"         "7gp-SP-a-Rel-i"       "7gp-SP-b-Rel-i"
#I    11-groups:
#I     "11gp-SP-a-i"          "11gp-SP-a-Rel-i"      "11gp-SP-a-Rel-1-i"
#I     "11gp-SP-b-i"          "11gp-SP-b-Rel-i"      "11gp-SP-c-Rel-i"
#I  
#I  Notes
#I  -----
#I  1. The example (first) argument of  `PqExample'  is  a  string;  each
#I     example above is in double quotes to remind you to include them.
#I  2. Some examples accept options. To find  out  whether  a  particular
#I     example accepts options, display it first (by including  `Display'
#I     as  last  argument)  which  will  also  indicate  how  `PqExample'
#I     interprets the options, e.g. `PqExample("11gp-SP-a-i", Display);'.
#I  3. Try `SetInfoLevel(InfoANUPQ, <n>);' for  some  <n>  in  [2  ..  4]
#I     before calling PqExample, to see what's going on behind the scenes.
#I  

If on your terminal you are unable to scroll back, an alternative to typing PqExample(); to see the displayed examples is to use on-line help, i.e.  you may type:

gap> ?anupq:examples

which will display this appendix in a GAP session. If you are not fussed about the order in which the examples are organised, AllPqExamples(); lists the available examples relatively compactly (see AllPqExamples (3.4-5)).

In the remainder of this appendix we will discuss particular aspects related to the Relators (see 6.2) and Identities (see 6.2) options, and the construction of the Burnside group B(5, 4).

A.1 The Relators Option

The Relators option was included because computations involving words containing commutators that are pre-expanded by GAP before being passed to the pq program may run considerably more slowly, than the same computations being run with GAP pre-expansions avoided. The following examples demonstrate a case where the performance hit due to pre-expansion of commutators by GAP is a factor of order 100 (in order to see timing information from the pq program, we set the InfoANUPQ level to 2).

Firstly, we run the example that allows pre-expansion of commutators (the function PqLeftNormComm is provided by the ANUPQ package; see PqLeftNormComm (3.4-1)). Note that since the two commutators of this example are very long (taking more than an page to print), we have edited the output at this point.

gap> SetInfoLevel(InfoANUPQ, 2); #to see timing information
gap> PqExample("11gp-i");
#I  #Example: "11gp-i" . . . based on: examples/11gp
#I  F, a, b, c, R, procId are local to `PqExample'
gap> F := FreeGroup("a", "b", "c"); a := F.1; b := F.2; c := F.3;
<free group on the generators [ a, b, c ]>
a
b
c
gap> R := [PqLeftNormComm([b, a, a, b, c])^11, 
>          PqLeftNormComm([a, b, b, a, b, c])^11, (a * b)^11];;
gap> procId := PqStart(F/R : Prime := 11);
1
gap> PqPcPresentation(procId : ClassBound := 7, 
>                              OutputLevel := 1);
#I  Lower exponent-11 central series for [grp]
#I  Group: [grp] to lower exponent-11 central class 1 has order 11^3
#I  Group: [grp] to lower exponent-11 central class 2 has order 11^8
#I  Group: [grp] to lower exponent-11 central class 3 has order 11^19
#I  Group: [grp] to lower exponent-11 central class 4 has order 11^42
#I  Group: [grp] to lower exponent-11 central class 5 has order 11^98
#I  Group: [grp] to lower exponent-11 central class 6 has order 11^228
#I  Group: [grp] to lower exponent-11 central class 7 has order 11^563
#I  Computation of presentation took 27.04 seconds
gap> PqSavePcPresentation(procId, ANUPQData.outfile);
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.

Now we do the same calculation using the Relators option. In this way, the commutators are passed directly as strings to the pq program, so that GAP does not "see" them and pre-expand them.

gap> PqExample("11gp-Rel-i");
#I  #Example: "11gp-Rel-i" . . . based on: examples/11gp
#I  #(equivalent to "11gp-i" example but uses `Relators' option)
#I  F, rels, procId are local to `PqExample'
gap> F := FreeGroup("a", "b", "c");
<free group on the generators [ a, b, c ]>
gap> rels := ["[b, a, a, b, c]^11", "[a, b, b, a, b, c]^11", "(a * b)^11"];
[ "[b, a, a, b, c]^11", "[a, b, b, a, b, c]^11", "(a * b)^11" ]
gap> procId := PqStart(F : Prime := 11, Relators := rels);
2
gap> PqPcPresentation(procId : ClassBound := 7, 
>                              OutputLevel := 1);
#I  Relators parsed ok.
#I  Lower exponent-11 central series for [grp]
#I  Group: [grp] to lower exponent-11 central class 1 has order 11^3
#I  Group: [grp] to lower exponent-11 central class 2 has order 11^8
#I  Group: [grp] to lower exponent-11 central class 3 has order 11^19
#I  Group: [grp] to lower exponent-11 central class 4 has order 11^42
#I  Group: [grp] to lower exponent-11 central class 5 has order 11^98
#I  Group: [grp] to lower exponent-11 central class 6 has order 11^228
#I  Group: [grp] to lower exponent-11 central class 7 has order 11^563
#I  Computation of presentation took 0.27 seconds
gap> PqSavePcPresentation(procId, ANUPQData.outfile);
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.

A.2 The Identities Option and PqEvaluateIdentities Function

Please pay heed to the warnings given for the Identities option (see 6.2); it is written mainly at the GAP level and is not particularly optimised. The Identities option allows one to compute p-quotients that satisfy an identity. A trivial example better done using the Exponent option, but which nevertheless demonstrates the usage of the Identities option, is as follows:

gap> SetInfoLevel(InfoANUPQ, 1);
gap> PqExample("B2-4-Id");
#I  #Example: "B2-4-Id" . . . alternative way to generate B(2, 4)
#I  #Generates B(2, 4) by using the `Identities' option
#I  #... this is not as efficient as using `Exponent' but
#I  #demonstrates the usage of the `Identities' option.
#I  F, f, procId are local to `PqExample'
gap> F := FreeGroup("a", "b");
<free group on the generators [ a, b ]>
gap> # All words w in the pc generators of B(2, 4) satisfy f(w) = 1 
gap> f := w -> w^4;
function( w ) ... end
gap> Pq( F : Prime := 2, Identities := [ f ] );
#I  Class 1 with 2 generators.
#I  Class 2 with 5 generators.
#I  Class 3 with 7 generators.
#I  Class 4 with 10 generators.
#I  Class 5 with 12 generators.
#I  Class 5 with 12 generators.
<pc group of size 4096 with 12 generators>
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.
gap> time; 
1400

Note that the time statement gives the time in milliseconds spent by GAP in executing the PqExample("B2-4-Id"); command (i.e. everything up to the Info-ing of the variables used), but over 90% of that time is spent in the final Pq statement. The time spent by the pq program, which is negligible anyway (you can check this by running the example while the InfoANUPQ level is set to 2), is not counted by time.

Since the identity used in the above construction of B(2, 4) is just an exponent law, the "right" way to compute it is via the Exponent option (see 6.2), which is implemented at the C level and is highly optimised. Consequently, the Exponent option is significantly faster, generally by several orders of magnitude:

gap> SetInfoLevel(InfoANUPQ, 2); # to see time spent by the `pq' program
gap> PqExample("B2-4");
#I  #Example: "B2-4" . . . the ``right'' way to generate B(2, 4)
#I  #Generates B(2, 4) by using the `Exponent' option
#I  F, procId are local to `PqExample'
gap> F := FreeGroup("a", "b");
<free group on the generators [ a, b ]>
gap> Pq( F : Prime := 2, Exponent := 4 );
#I  Computation of presentation took 0.00 seconds
<pc group of size 4096 with 12 generators>
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.
gap> time; # time spent by GAP in executing `PqExample("B2-4");' 
50

The following example uses the Identities option to compute a 3-Engel group for the prime 11. As is the case for the example "B2-4-Id", the example has both a non-interactive and an interactive form; below, we demonstrate the interactive form.

gap> SetInfoLevel(InfoANUPQ, 1); # reset InfoANUPQ to default level
gap> PqExample("11gp-3-Engel-Id", PqStart);
#I  #Example: "11gp-3-Engel-Id" . . . 3-Engel group for prime 11
#I  #Non-trivial example of using the `Identities' option
#I  F, a, b, G, f, procId, Q are local to `PqExample'
gap> F := FreeGroup("a", "b"); a := F.1; b := F.2;
<free group on the generators [ a, b ]>
a
b
gap> G := F/[ a^11, b^11 ];
<fp group on the generators [ a, b ]>
gap> # All word pairs u, v in the pc generators of the 11-quotient Q of G 
gap> # must satisfy the Engel identity: [u, v, v, v] = 1.
gap> f := function(u, v) return PqLeftNormComm( [u, v, v, v] ); end;
function( u, v ) ... end
gap> procId := PqStart( G );
3
gap> Q := Pq( procId : Prime := 11, Identities := [ f ] );
#I  Class 1 with 2 generators.
#I  Class 2 with 3 generators.
#I  Class 3 with 5 generators.
#I  Class 3 with 5 generators.
<pc group of size 161051 with 5 generators>
gap> # We do a ``sample'' check that pairs of elements of Q do satisfy
gap> # the given identity:
gap> f( Random(Q), Random(Q) );
<identity> of ...
gap> f( Q.1, Q.2 );
<identity> of ...
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.

The (interactive) call to Pq above is essentially equivalent to a call to PqPcPresentation with the same arguments and options followed by a call to PqCurrentGroup. Moreover, the call to PqPcPresentation (as described in PqPcPresentation (5.6-1)) is equivalent to a "class 1" call to PqPcPresentation followed by the requisite number of calls to PqNextClass, and with the Identities option set, both PqPcPresentation and PqNextClass "quietly" perform the equivalent of a PqEvaluateIdentities call. In the following example we break down the Pq call into its low-level equivalents, and set and unset the Identities option to show where PqEvaluateIdentities fits into this scheme.

gap> PqExample("11gp-3-Engel-Id-i");
#I  #Example: "11gp-3-Engel-Id-i" . . . 3-Engel grp for prime 11
#I  #Variation of "11gp-3-Engel-Id" broken down into its lower-level component
#I  #command parts.
#I  F, a, b, G, f, procId, Q are local to `PqExample'
gap> F := FreeGroup("a", "b"); a := F.1; b := F.2;
<free group on the generators [ a, b ]>
a
b
gap> G := F/[ a^11, b^11 ];
<fp group on the generators [ a, b ]>
gap> # All word pairs u, v in the pc generators of the 11-quotient Q of G 
gap> # must satisfy the Engel identity: [u, v, v, v] = 1.
gap> f := function(u, v) return PqLeftNormComm( [u, v, v, v] ); end;
function( u, v ) ... end
gap> procId := PqStart( G : Prime := 11 );
4
gap> PqPcPresentation( procId : ClassBound := 1);
gap> PqEvaluateIdentities( procId : Identities := [f] );
#I  Class 1 with 2 generators.
gap> for c in [2 .. 4] do
>      PqNextClass( procId : Identities := [] ); #reset `Identities' option
>      PqEvaluateIdentities( procId : Identities := [f] );
>    od;
#I  Class 2 with 3 generators.
#I  Class 3 with 5 generators.
#I  Class 3 with 5 generators.
gap> Q := PqCurrentGroup( procId );
<pc group of size 161051 with 5 generators>
gap> # We do a ``sample'' check that pairs of elements of Q do satisfy
gap> # the given identity:
gap> f( Random(Q), Random(Q) );
<identity> of ...
gap> f( Q.1, Q.2 );
<identity> of ...
#I  Variables used in `PqExample' are saved in `ANUPQData.example.vars'.

A.3 A Large Example

An example demonstrating how a large computation can be organised with the ANUPQ package is the computation of the Burnside group B(5, 4), the largest group of exponent 4 generated by 5 elements. It has order 2^2728 and lower exponent-p central class 13. The example "B5-4.g" computes B(5, 4); it is based on a pq standalone input file written by M. F. Newman.

To be able to do examples like this was part of the motivation to provide access to the low-level functions of the standalone program from within GAP.

Please note that the construction uses the knowledge gained by Newman and O'Brien in their initial construction of B(5, 4), in particular, insight into the commutator structure of the group and the knowledge of the p-central class and the order of B(5, 4). Therefore, the construction cannot be used to prove that B(5, 4) has the order and class mentioned above. It is merely a reconstruction of the group. More information is contained in the header of the file examples/B5-4.g.

procId := PqStart( FreeGroup(5) : Exponent := 4, Prime := 2 );
Pq( procId : ClassBound := 2 );
PqSupplyAutomorphisms( procId,
      [
        [ [ 1, 1, 0, 0, 0],      # first automorphism
          [ 0, 1, 0, 0, 0],
          [ 0, 0, 1, 0, 0],
          [ 0, 0, 0, 1, 0],
          [ 0, 0, 0, 0, 1] ],

        [ [ 0, 0, 0, 0, 1],      # second automorphism
          [ 1, 0, 0, 0, 0],
          [ 0, 1, 0, 0, 0],
          [ 0, 0, 1, 0, 0],
          [ 0, 0, 0, 1, 0] ]
                             ] );;

Relations :=
  [ [],          ## class 1
    [],          ## class 2
    [],          ## class 3
    [],          ## class 4
    [],          ## class 5
    [],          ## class 6
    ## class 7     
    [ [ "x2","x1","x1","x3","x4","x4","x4" ] ],
    ## class 8
    [ [ "x2","x1","x1","x3","x4","x5","x5","x5" ] ],
    ## class 9
    [ [ "x2","x1","x1","x3","x4","x4","x5","x5","x5" ],
      [ "x2","x1","x1","x2","x3","x4","x5","x5","x5" ],
      [ "x2","x1","x1","x3","x3","x4","x5","x5","x5" ] ],
    ## class 10
    [ [ "x2","x1","x1","x2","x3","x3","x4","x5","x5","x5" ],
      [ "x2","x1","x1","x3","x3","x4","x4","x5","x5","x5" ] ],
    ## class 11
    [ [ "x2","x1","x1","x2","x3","x3","x4","x4","x5","x5","x5" ],
      [ "x2","x1","x1","x2","x3","x1","x3","x4","x2","x4","x3" ] ],
    ## class 12
    [ [ "x2","x1","x1","x2","x3","x1","x3","x4","x2","x5","x5","x5" ],
      [ "x2","x1","x1","x3","x2","x4","x3","x5","x4","x5","x5","x5" ] ],
    ## class 13
    [ [ "x2","x1","x1","x2","x3","x1","x3","x4","x2","x4","x5","x5","x5" 
        ] ]
];

for class in [ 3 .. 13 ] do
    Print( "Computing class ", class, "\n" );
    PqSetupTablesForNextClass( procId );

    for w in [ class, class-1 .. 7 ] do

        PqAddTails( procId, w );   
        PqDisplayPcPresentation( procId );

        if Relations[ w ] <> [] then
            # recalculate automorphisms
            PqExtendAutomorphisms( procId );

            for r in Relations[ w ] do
                Print( "Collecting ", r, "\n" );
                PqCommutator( procId, r, 1 );
                PqEchelonise( procId );
                PqApplyAutomorphisms( procId, 15 ); #queue factor = 15
            od;

            PqEliminateRedundantGenerators( procId );
        fi;   
        PqComputeTails( procId, w );
    od;
    PqDisplayPcPresentation( procId );

    smallclass := Minimum( class, 6 );
    for w in [ smallclass, smallclass-1 .. 2 ] do
        PqTails( procId, w );
    od;
    # recalculate automorphisms
    PqExtendAutomorphisms( procId );
    PqCollect( procId, "x5^4" );
    PqEchelonise( procId );
    PqApplyAutomorphisms( procId, 15 ); #queue factor = 15
    PqEliminateRedundantGenerators( procId );
    PqDisplayPcPresentation( procId );
od;

A.4 Developing descendants trees

In the following example we will explore the 3-groups of rank 2 and 3-coclass 1 up to 3-class 5. This will be done using the p-group generation machinery of the package. We start with the elementary abelian 3-group of rank 2. From within GAP, run the example "PqDescendants-treetraverse-i" via PqExample (see PqExample (3.4-4)).

gap> G := ElementaryAbelianGroup( 9 );
<pc group of size 9 with 2 generators>
gap> procId := PqStart( G );
5
gap> #
gap> #  Below, we use the option StepSize in order to construct descendants
gap> #  of coclass 1. This is equivalent to setting the StepSize to 1 in
gap> #  each descendant calculation.
gap> #
gap> #  The elementary abelian group of order 9 has 3 descendants of
gap> #  3-class 2 and 3-coclass 1, as the result of the next command
gap> #  shows. 
gap> #
gap> PqDescendants( procId : StepSize := 1 );
[ <pc group of size 27 with 3 generators>, 
  <pc group of size 27 with 3 generators>, 
  <pc group of size 27 with 3 generators> ]
gap> #
gap> #  Now we will compute the descendants of coclass 1 for each of the
gap> #  groups above. Then we will compute the descendants  of coclass 1
gap> #  of each descendant and so  on.  Note  that the  pq program keeps
gap> #  one file for each class at a time.  For example, the descendants
gap> #  calculation for  the  second  group  of class  2  overwrites the
gap> #  descendant file  obtained  from  the  first  group  of  class 2.
gap> #  Hence,  we have to traverse the descendants tree  in depth first
gap> #  order.
gap> #
gap> PqPGSetDescendantToPcp( procId, 2, 1 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
2
gap> PqPGSetDescendantToPcp( procId, 3, 1 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
2
gap> PqPGSetDescendantToPcp( procId, 4, 1 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
2
gap> #
gap> #  At this point we stop traversing the ``left most'' branch of the
gap> #  descendants tree and move upwards.
gap> #
gap> PqPGSetDescendantToPcp( procId, 4, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> PqPGSetDescendantToPcp( procId, 3, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> #  
gap> #  The computations above indicate that the descendants subtree under
gap> #  the first descendant of the elementary abelian group of order 9
gap> #  will have only one path of infinite length.
gap> #
gap> PqPGSetDescendantToPcp( procId, 2, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
4
gap> #
gap> #  We get four descendants here, three of which will turn out to be
gap> #  incapable, i.e., they have no descendants and are terminal nodes
gap> #  in the descendants tree.
gap> #
gap> PqPGSetDescendantToPcp( procId, 2, 3 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> #
gap> #  The third descendant of class three is incapable.  Let us return
gap> #  to the second descendant of class 2.
gap> #
gap> PqPGSetDescendantToPcp( procId, 2, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
4
gap> PqPGSetDescendantToPcp( procId, 3, 1 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> PqPGSetDescendantToPcp( procId, 3, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> #
gap> #  We skip the third descendant for the moment ... 
gap> #
gap> PqPGSetDescendantToPcp( procId, 3, 4 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> #
gap> #  ... and look at it now.
gap> #
gap> PqPGSetDescendantToPcp( procId, 3, 3 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
6
gap> #
gap> #  In this branch of the descendant tree we get 6 descendants of class
gap> #  three.  Of those 5 will turn out to be incapable and one will have
gap> #  7 descendants.
gap> #
gap> PqPGSetDescendantToPcp( procId, 4, 1 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0
gap> PqPGSetDescendantToPcp( procId, 4, 2 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
7
gap> PqPGSetDescendantToPcp( procId, 4, 3 );
gap> PqPGExtendAutomorphisms( procId );
gap> PqPGConstructDescendants( procId : StepSize := 1 );
#I  group restored from file is incapable
0

To automate the above procedure to some extent we provide:

A.4-1 PqDescendantsTreeCoclassOne
‣ PqDescendantsTreeCoclassOne( i )( function )
‣ PqDescendantsTreeCoclassOne( )( function )

for the ith or default interactive ANUPQ process, generate a descendant tree for the group of the process (which must be a pc p-group) consisting of descendants of p-coclass 1 and extending to the class determined by the option TreeDepth (or 6 if the option is omitted). In an XGAP session, a graphical representation of the descendants tree appears in a separate window. Subsequent calls to PqDescendantsTreeCoclassOne for the same process may be used to extend the descendant tree from the last descendant computed that itself has more than one descendant. PqDescendantsTreeCoclassOne also accepts the options CapableDescendants (or AllDescendants) and any options accepted by the interactive PqDescendants function (see PqDescendants (5.3-6)).

Notes

  1. PqDescendantsTreeCoclassOne first calls PqDescendants. If PqDescendants has already been called for the process, the previous value computed is used and a warning is Info-ed at InfoANUPQ level 1.

  2. As each descendant is processed its unique label defined by the pq program and number of descendants is Info-ed at InfoANUPQ level 1.

  3. PqDescendantsTreeCoclassOne is an "experimental" function that is included to demonstrate the sort of things that are possible with the p-group generation machinery.

Ignoring the extra functionality provided in an XGAP session, PqDescendantsTreeCoclassOne, with one argument that is the index of an interactive ANUPQ process, is approximately equivalent to:

PqDescendantsTreeCoclassOne := function( procId )
    local des, i;

    des := PqDescendants( procId : StepSize := 1 );
    RecurseDescendants( procId, 2, Length(des) );
end;

where RecurseDescendants is (approximately) defined as follows:

RecurseDescendants := function( procId, class, n )
    local i, nr;

    if class > ValueOption("TreeDepth") then return; fi;

    for i in [1..n] do
        PqPGSetDescendantToPcp( procId, class, i );
        PqPGExtendAutomorphisms( procId );
        nr := PqPGConstructDescendants( procId : StepSize := 1 );
        Print( "Number of descendants of group ", i,
               " at class ", class, ": ", nr, "\n" );
        RecurseDescendants( procId, class+1, nr );
    od;
    return;
end;

The following examples (executed via PqExample; see PqExample (3.4-4)), demonstrate the use of PqDescendantsTreeCoclassOne:

"PqDescendantsTreeCoclassOne-9-i"

approximately does example "PqDescendants-treetraverse-i" again using PqDescendantsTreeCoclassOne;

"PqDescendantsTreeCoclassOne-16-i"

uses the option CapableDescendants; and

"PqDescendantsTreeCoclassOne-25-i"

calculates all descendants by omitting the CapableDescendants option.

The numbers 9, 16 and 25 respectively, indicate the order of the elementary abelian group to which PqDescendantsTreeCoclassOne is applied for these examples.

 [Top of Book]  [Contents]   [Previous Chapter]   [Next Chapter] 
Goto Chapter: Top 1 2 3 4 5 6 7 A Bib Ind

generated by GAPDoc2HTML